Fixing the Stock
Buy some electric tape from a store. Electric tape in most parts of making your gun less wobbly is going to be your friend. Buy two rolls as you may run out or need an extra if one is lost.
Take off the stock of your gun. If your gun has a fixed stock, it generally does not wobble, so these steps are specifically for adjustable stocks.
Add a layer of electric tape on top of the buffer tube at about half an inch from the start of the tube all the way until you're halfway across the buffer tube.
Put your stock back on.
Experiment until the stock is stiff, but not too stiff where you can't adjust it. This is kind of like adjusting a hop-up, as it is trial and error. Keep adding pieces and removing pieces until it's good.
Fixing Magazines
Wrap electric tape all the around the top of the magazine.
Keep doing it until it is stiff but not too stiff. Again, this is trial and error.
Tightening the Selector Switch
Take off the cap at the base of the selector switch. This tip is specifically for AK's.
Take a screw driver and tighten it until it is tight but not too tight.
Put the cap back on.
Comments
0 comment