- Open the foil packaging so the seam in the back faces you. Remove the code card from the back of the pack.
- Turn over the pack so the reverse side of the back card faces you. Move 1, 3, or 4 cards from the back to the front (depending on the set you have).
- Flip the pack over again to see your new cards. An energy card will be in front and your reverse, rare, and/or holographic cards will be last.
How to Reorder Your Pokemon Card Packs
Hold the pack so the face of the first card is toward you. Don’t worry about seeing this card ahead of time—it’s not one of the reverse, rare, or holographic cards in your pack.
Remove the QR code card from the back of the pack. Don’t look at the colored (green or white) side of the card since this can “spoil” the rarest card for you. For example, a white code card indicates the rare card will be holographic or better.
Turn over the pack and move the back 1, 3, or 4 cards to the front. The number of cards you should move depends on the pack you have: If your pack is Scarlet & Violet (2023) or newer, move 1 card. If your pack is Sun & Moon (2017) through Crown Zenith (2023) move 4 cards. If your pack is Evolutions (2016) or older, move 3 cards.
Examine your cards—the rarest card is now the last in the pack. Turn your pack back over so the face side of the top card is toward you. If your booster pack contains an energy card, this will be on top, followed by common and uncommon Pokémon. At the back, you’ll find reverse cards and rare and/or holographic Pokémon cards. It’s not “required” to do the Pokémon card trick to show the rarest card last. It’s just a fun way to build anticipation and make each new booster pack exciting!
How to Open Pokemon Cards without Damaging Them
Open the package slowly and carefully if you plan on saving the foil as a collectible (and to avoid bending or tearing one of the cards inside): Step 1: Hold the pack by the sides in one hand. Loosen the back flap from top to bottom by sliding your finger up and down underneath it. Step 2: Hold the back flap with your pointer finger and thumb in one hand. With your other thumb, push the top seam of the foil away from the flap (or, pinch the other side of the foil with your other hand and pull the seam open). Step 3: Push or pull until the top seam opens enough to slide one finger inside. Slide a finger inside the seam to fully open the pack from the top. Step 4: Slide the cards out of the top. Make sure the back side of the packaging is facing you to reveal the face of the first card (the front side showing a Pokémon). This way, the color on the back of the code card won’t spoil the rare card for you. If you don’t plan on saving the foil, feel free to tear into it however you like! Just make sure not to damage the cards inside.
Comments
0 comment