Disassembling the Humidifier for Cleaning
Gather your supplies. To clean your Crane humidifier, you will need water and four tablespoons of white vinegar. You will also need a soft, clean cloth if you choose to dry the humidifier base by hand instead of letting it air dry.
Unplug the humidifier. It is important that you do not attempt to clean your Crane humidifier while it is plugged in. Doing so could result in injury to you or damage to the machine. Before cleaning the humidifier make sure you turn it off and unplug it from the power source.
Separate the water tank from the base. You will need to remove the water tank from the base of the humidifier. You will be cleaning each part separately. Separate these parts of the humidifier as you prepare to clean it.
Remove any additional accessories. If your humidifier has accessories, like diffusers, you will need to remove these parts. They will need to be cleaned separately from the humidifier tank and base.
Cleaning the Humidifier Tank and Accesories
Fill the tank with water. Remove the water tank from the humidifier base and unscrew the cap. Add water until the tank is filled to or just below the maximum fill line.
Add white vinegar to the tank. Measure out two tablespoons of white vinegar. Gently add the vinegar to the humidifier tank. For larger humidifiers, like the Crane SmartDrop, you can add up to three tablespoons of white vinegar.
Vigorously shake the tank. After you add the vinegar and water to the tank, replace the cap and screw it on tightly. Then hold the tank with two hands and shake vigorously. You will want to shake the tank for at least 30 seconds.
Empty, rinse, and dry the tank. After you have vigorously shaken the vinegar solution in the tank, unscrew the cap. Pour the vinegar solution down the drain of a nearby sink or bathtub. Rinse the tank with water until the vinegar smell dissipates. Allow it to dry until next use.
Clean the accessories. If your humidifier has accessories like a diffuser, you will need to soak them in a solution of two tablespoons of white vinegar and one gallon of water for about 10 minutes. Then rinse and air dry the accessories. Scrub away any build-up on these accessories with a dampened soft cloth or cotton swab.
Cleaning the Humidifier Base
Fill the base with water. After you have removed the humidifier tank from its base, fill the base with water. You will need to fill the base up to the maximum fill line.
Add white vinegar. Once you have filled the humidifier base with water, you will need to add white vinegar to the base. Measure out two tablespoons of white vinegar and add them to the water in the base. Allow the vinegar and water to sit in the humidifier base for 30 minutes.
Empty the base. Pour the water and vinegar out of the base and down a nearby sink or bathtub drain. Be sure you empty all of the vinegar solution from the base.
Clean the nooks and crannies. Sometimes sludge can build up in the humidifier base. If this is the case, dip a soft cloth or cotton swab in the vinegar solution and use it to scrub out any hard-to-reach areas.
Rinse and dry the base. Rinse the base with cool water until the vinegar smell dissipates. Allow the base to air dry before you use it again. Alternatively, you can wipe the base dry with a clean, soft cloth.
Comments
0 comment